At this time just remove the witness lines and what little flash there is. Clean up Part D-17 and set aside for a little while.Ĭlean up the hull top pieces D-20, D-18, E-12, and D-22. If your kit is lkie mine you will see that part D-19 is going to interfere with the installation of part D-17. After you have glued all the joints reinforce them with a little tape to hold everything in place while everything sets up. Make sure you have removed the witness lines from part D-19 and glue in at this time. Do not glue them to the bulkheads at this time. Now glue the sides to the bottom plates only. Believe it makes a difference as the tolerances are pretty tight. It helps if you remove the witness lines from all the parts. Take the sides E-3 and E-4 and clean them up. The plate has to be bent in two places and glue to it the three D-29s. Take the bottom plate B-15 and glue the two bulkheads B-18 in place and vertical.

The best way to get this thing together is this sequence. with so many parts in the hull something will inevitably create a fit issue.

There are a couple of places to watch out for.įirst up. In British Army use it was replaced by the Chieftain.Īssembly recommendations from Tim Treadway: Between 19, 4,423 Centurions were produced, consisting of 13 basic marks and numerous variants. It became one of the most widely used tank designs, equipping armies around the world, with some still in service until the 1990s. Centurions modified as APC were used in Gaza, the West Bank and on the Lebanese border. Israel used Centurions in the 1967 Six Day War, 1973 Yom Kippur War, and during the 19 invasions of Lebanon. The Centurion later served in the Indo-Pakistani War of 1965, it served with the Royal Australian Armoured Corps in Vietnam. It first entered combat with the British Army in the Korean War in 1950, in support of the UN forces. Development of the tank began in 1943 and manufacture of the Centurion began in January 1945. The chassis was also adapted for several other roles, and these have remained in service to this day. It is widely considered to be one of the most successful post-war tank designs, remaining in production into the 1960s, and seeing combat in the front lines into the 1980s. Model: British MBT Centurion Mk.3 (Korean war)Ĭenturion Mk.3 - was the primary British main battle tank of the post-World War II period.

British centurion mk 1 main battle tank